Jump to content


Photo

Sacn Transmits All 0's If Selected As A Multiple Output


  • Please log in to reply
1 reply to this topic

#1 niloc887

niloc887

    Newbie

  • Members
  • Pip
  • 2 posts

Posted 10 August 2019 - 08:23 PM

Hello,

 

I have found that when sACN is set to be a multiple output it transmits all channels at 0.

 

sACN as a single output works perfectly.

 

I was planning to send sACN down to the stage and have the wing output locally on the same universe but at the moment that is not possible.

 

ArtNet output works fine with multiple outputs.

 

I have taken a screen capture illustrating the problem. This shows the issue with my current showfile but i have also tested with a new file and the problem persists.

 

https://youtu.be/PehPqaLjbWM

 

 

 

SOFTWARE DETAILS

 

LSC Clarity

 

Application version 2.5.1 r6715

Library version 14.1.424

HW API version 2.0.6428.0

 

 

 

Thanks

 

Colin


  • 0

#2 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,291 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 11 August 2019 - 08:05 PM

Well found.

This is 100% repeatable so should be an easy fix.

Issue #CLR-1795


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users