Jump to content


Creating Cells In Fixture Editor

  • Please log in to reply
1 reply to this topic

#1 oliverhauser



  • Members
  • PipPip
  • 11 posts
  • Gender:Male

Posted 21 August 2017 - 04:14 PM

Hi There,


I've been testing a digital/pixel led strip. Generic kind (12x1 RGB from the library). I have perfect control over the strip and running it through the matrix has been a breeze. However, the colour channel order is incorrect. Mine is BRG and LSC's is RGB.


Went into the fixture editor and opened the generic profile, changed the channel order and saved as a new fixture. Patched my new fixture into clarity, but when opening the programmer, there were no cells available to select. Only a single fixture with multiple attributes. Nothing else was changed in fixture editor except the channel order of the colours.


Is there something I'm possibly missing?

  • 0

#2 LSC TechSupport

LSC TechSupport


  • Admin
  • PipPipPipPipPip
  • 2,300 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 30 August 2017 - 06:19 PM

Editing an existing fixture will destroy any Compound fixture in it, you need to create a new fixture from scratch as a Compound fixture. The instructions on how to do this are in the Users Manual.


However if it was me, I would just request a free template from the LSC website form and wait for it to arrive. 



  • 0
Richie Mickan
LSC Lighting Systems
LSC Web Site
Email me

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users