Jump to content


Photo

Art Net In


  • Please log in to reply
5 replies to this topic

#1 byopha

byopha

    Member

  • Members
  • PipPip
  • 8 posts

Posted 07 May 2017 - 09:07 AM

Good morning, it is possible for the clarity system to be controlled via art net in, as well as the MA light system.
Or do you have some other way?
  • 0

#2 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,292 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 17 May 2017 - 12:14 AM

We offer both OSC and TCP/UDP network interfaces for remote control of Clarity. Both are explained in the Users manual.


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me

#3 byopha

byopha

    Member

  • Members
  • PipPip
  • 8 posts

Posted 24 May 2017 - 11:04 PM

I mean turn one of the outputs 1,2,3 or 4 to be dmx in along with net art


  • 0

#4 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,292 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 25 May 2017 - 05:55 PM

No.

What are you wanting to do with the input universe?

 

Do you want to merge it with the output, or do you want to use it as a remote fader to control a submaster, or something else?


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me

#5 byopha

byopha

    Member

  • Members
  • PipPip
  • 8 posts

Posted 26 May 2017 - 10:41 AM

It would be to control with two consoles simutaneously without, to see that even in backup of plug-as dmx lines in backup it holds if a master drops but a master does not act on the fixure, and with the cables plugged into the master so that it would serve a Backup if she is not going to act


  • 0

#6 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,292 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 29 May 2017 - 08:02 PM

The Tracking Backup in Clarity does this automatically.

 

The tracking backup console does not output any Art-Net unless the main console fails. As soon as the main consoles stops sending 'heartbeats' the backup console starts sending Art-Net.

 

You can also use our Nexus boxes to do this externally with two different consoles. Set one as prmary and the other as backup, and only the Art-Net from the main console will be processed. If the main console fails, then the backup is auto-switched and the Art-Net is processed until the main console returns.

 

I am not sure that there is much use of having an Art-Net into the main console in case of the main console failing, as when it fails the Art-Net input will not do anything.


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users