Jump to content


Photo

Virtual Lighting Show for Clarity


  • Please log in to reply
4 replies to this topic

#1 woody

woody

    Member

  • Members
  • PipPip
  • 37 posts

Posted 24 July 2010 - 11:38 AM

Newbee here, looking to learn and was excited about Clarity software and it's availability for a MAC. Downloaded Clarity - awesome! Would like to see what I'm doing and I understand Virtual Light Show is what I need. Is it available for a MAC? If not, is it expected to be available for a MAC? When?

  • 0

#2 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,289 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 25 July 2010 - 06:18 PM

We should have a virtual lighting show for the Mac within a few weeks.
  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me

#3 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,289 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 10 August 2010 - 11:59 PM

It turns out that getting a stand alone virtual lighting show for the Mac is not currently possible.

So here is the simple workaround.

1) Download the free demo version of the Capture software from here
Capture Download Page

2) Download the attached Capture show file and then unzip it.

Install the Capture software, open the demo show file and it should all work. The only limitation is that the demo version of the Capture software will shut down every 90 minutes, but it only takes a few seconds to get it going again.

Attached Files


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me

#4 quocvule92

quocvule92

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 22 October 2013 - 06:28 AM

Hello.
I'm newbie, I don't understand why my Capture isn't open Clarity Rock & Roll Demo IV, my laptop is running win7. When I open this file, Capture request Update fixture (Clay Paky, ... ) and I press Update but don't appeare demo show I need...
This is image I take my screen... 
:(

 

Please help me. Thank you very much !

57885022.untitled.png


  • 0

#5 LSC TechSupport

LSC TechSupport

    Guru

  • Admin
  • PipPipPipPipPip
  • 2,289 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:My wife and two daughters, Water skiing, Sleeping :-)

Posted 24 October 2013 - 08:53 PM

The Capture software is not an LSC product. It is a 3rd party software provided by Capture Sweden. You will need to use their tech support services to resolve the problem.

 

What I can tell you is that 99% of problems with any Visualiser software are to do with the Graphics card and driver. Try updating your video card driver first and then if it still crashes visit www.capturesweden.com and look for their tech support links.


  • 0
Regards
Richie Mickan
TechSupport
LSC Lighting Systems
LSC Web Site
Email me


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users